GPS Module for Raspberry Pi 3B / 2B / B+ / A+
Main Features:
● This GPS module supports Raspberry Pi model A, B, A+, B+, Zero, 2, 3
● -165dBm sensitivity. 1Hz ( default ), up to 5Hz. 66 channels. At least 100mA current draw to startup
● With L80 – M39 GPS chip inside. The L80 – M39 with 66 search channels and 22 simultaneous tracking channels, it acquires and tracks satellites in the shortest time even at indoor signal level
● It can communicate satellite with UART or USB
● Uses CP2102 as USB to UART bridge chip, it is stable and fast
● Note: the expansion board and the USB cable showed in the picture are not included in the package
Parameters:
Satellites: 66 acquisition channels, 22 tracking channels
Work voltage: 4.5 – 5.5V
Maximum current: 100mA
Work temperature: -40 – 85 Deg.C
GPS: L80 – M39
Patch antenna size: 15.0 x 15.0 x 4.0mm
Position accuracy: less than 2.5M CEP
Velocity accuracy: less than 1.0m/s
Warm / cold start without ESEY: less than 35s
Warm / cold start with ESEY: less than 15s
Acquisition sensitivity: -148dBm
Tracking sensitivity: -165dBm
Update rate: 1Hz ( default ), up to 5Hz
Baud rate: 4800 – 115200bps, 9600bps default
Protocols: NMEA 0183
Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.