– Motorcycle, scooter, bike anti-theft
– Motorcycle, scooter, bike real-time tracking
– Manage personnel
– Initialization, send SMS (begin 123456) to the unit, it replies OK, then you initialize all the settings to default factory settings.
– Change password, make sure the new password is in 6 digits arabic numbers.
– Authorization, there are 4 numbers to be allowed to authorize in the tracker at most, you just need send SMS in the format specified to the device.
– Single locating, if there is no authorized number, any number dials up the device number, it will report tracking message.
– Dialing and SMS tracking, make a call or send SMS to the device number, it will hang up and reply a real-time tracking message.
– Continuous tracking automatically, send specified format message, it will report real-time tracking message.
– Alarms, it sets with low battery alarm, power failure alarm, GPS blind spot alarm, SOS alarm, GEO-fence alarm, movement alarm, overspeed alarm, ACC working alarm and vibration alarm.
– It can cut off and resume the oil and power system of your vehicle by send specified format SMS to the device.
– You can set up arm by the SMS and the remote controller, you can disarm through the same way too.
– It has 3 modes to switch, the tracker, the monitor listening, and the dial mode.
– With it, you can check the vehicle state, IMEI, and reset SMS, set time zone, GPRS, APN, IP and port, and reset the device.
– Storage Temperature: -40 to 85 Deg.C
– Operation Temperature: -20 to 55 Deg.C
– Humidity: 5 – 95 percent
|Dimension and Weight||